Specific Attention

Devoted to Aging Workers

Help People

Work On The Job

24+ years

of Research & Development

Disability Work Consulting is visitor-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Specific Attention

Devoted to Aging Workers

Help People

Work On The Job

24+ years

of Research & Development

Hand Control Lever – Lawnmowers

Hand Control Levers for Lawnmowers allow workers with lower extremity impairments to control lawnmower brakes and clutch by hand.

 

Description

Hand Control Levers for lawnmowers allow workers with lower extremity impairments to control the foot pedal on the left side of the mower by hand. Most brakes and clutches are controlled by foot pedals, preventing workers with lower extremity impairments to operate the equipment. Hand Control Levers for lawnmowers are bolted onto foot pedal shank to prevent it from pivoting.

 

Hand Control Levers for lawnmowers have a flat plate at the bottom with 4 bolt holes, and a second clamping plate with matching bolt holes.  The lever is attached by ‘sandwiching’ the pedal shank between the two flat plates and tightening the bolts.  The lever is 30-inches-long and has two slight bends away from the mower hood and towards the mower seat.

 

The levers may need to be bent for the specific operator or lawnmower being used. A local mechanic or lawnmower repair shop could shape the lever specifically as needed.

 

Workers with common conditions such as these would benefit from a Hand Control Lever for lawnmowers.

Ankle Pain

Cerebral Palsy (CP)

Diabetes/Diabetic Neuropathy

Foot Pain

Heel Spurs

Hip Pain

Knee Pain

Leg Amputation

Lower Extremity Impairments

MS

Neuropathy

Paraplegia

Prosthetic Limb

Quadriplegia

Replaced Joints – Arthroplasty

Stroke

Traumatic Brain Injury

Rheumatoid Arthritis

Osteoarthritis

 

 

Hand Control Levers for lawnmowers bolt directly to the pedal shank.  There is seldom need for permanent modification to the foot pedal. The levers often need shaped for convenience of use by specific equipment operators.

 

Length:  30 1/4 ”

Diameter:  1″

Foot plate:  2 1/2 x 4″

The foot plate bolts directly onto the pedal using 7/16″ wrench.

 

 

 

 

You may also like…

Top